Pool basin fittings

Home Swimming Pool Parts

Pool Basin Fittings

Main Drain for Residential Pools-ABS
Main Drain for Residential Pools
Features:
  • Manufactured in ABS.
  • Recommendation – Main drains must be arranged properly so that there is no risk of bathers being drawn towards them or trapped there.
Main Drain for Commercial Pools-ABS
Main-Drain-for-Commercial-Pools-abs
Features:
  • Manufactured in ABS.
  • Main drains available with flat drain grille.
  • Recommendation – Main drains must be arranged properly so that there is no risk of bathers being drawn towards them or trapped there.
Wall Inlets-ABS
Wall-Inlets
Features:
  • Manufactured in ABS.
  • Wall inlet allows easy control of flow into the pool by adjusting the angle of the ball.
  • Recommended Flow 5m3/h – 9m3/h.
Floor Inlets-ABS
Floor-Inlets
Features:
  • Manufactured in ABS.
  • Adjustable floor inlet allows easy control of flow into the pool by adjusting the screw available.
  • Recommended Flow 9m3/h – 12m3/h.
  • Solvent / threaded type.
Vacuum Point-ABS
Vacuum Point
Features:
  • Manufactured in ABS.
  • Vacuum Point is installed where an automatic pool cleaner or vacuum hose is to be fitted.
  • These fittings were supplied with removable plug.
  • Solvent / threaded type.
Overflow Fitting-ABS
Vacuum Point
Features:
  • Manufactured in ABS.
  • Suitable for overflow channels required to drain out water to balancing tank.
  • Recommended flow 7m3/h.
  • Solvent type.
Wall Conduit
Wall-Conduit
Features:
  • Manufactured in ABS/PP.
  • 300 mm Long conduit, can be easily cut to required lengths depending on pool shell thickness, have puddles for positioning within the pool shell.
  • Solvent end – Back side to suit pipe of 50 mm.
  • Threaded end – Front side to suit pools fittings 2″.
Overflow Grating
Overflow-Grating
Features:
  • Manufactured in ABS/PP with UV protection.
  • Single spine connection.
  • Comes in 250/300 mm wide.
  • Anti-slip surface.
Main Drain Grille-SS
Main-Drain-Grille
Features:
  • Manufactured in SS.
  • Available for concrete & pre fabricated pools.
  • Grille cover diameter is 150 mm.
Main Drain for Commercial Pools-SS
Main-Drain-for-Commercial-Pools
Features:
  • Manufactured in SS.
  • Main drains available with flat drain grille.
  • Recommendation: Main drains must be arranged properly so that there is no risk of bathers being drawn towards them or trapped there.
Floor Inlets-SS
Floor-Inlets

Floor inlet allows easy control of flow into the pool by adjusting the centre screw. Recommended flow 9 m3/h.Threaded type.

Features:
  • Manufactured in SS.
  • Floor inlet allows easy control of flow into the pool by adjusting the centre screw.
  • Recommended Flow 12m3/h.
  • Threaded type.
Wall Inlets-SS
wall-inlets-ss
Features:
  • Manufactured in SS.
  • Recommended Flow 9m3/hr.
  • Threaded type.